|
|
Build Your Online Product Catalogs?
| Product Name: |
RTV-2 liquid Shoe soles mold Silicone
|
| Supply Ability: |
2000kgs |
| Related proudcts |
silicone rubber, rtv-2 liquid silicon, shoe soles silicone, |
| Specifications |
T1238# |
| Price Term: |
FOB, CIF, CFR, EXW |
| Port of loading: |
Shenzhen |
| Minimum Order |
200kgs |
| Unit Price: |
FOB Shenzhen US $6.5 �8.5 / kg |
|
Specifications of RTV-2 liquid Shoe soles mold Silicone
1. Light viscosity and good flowability;
2. Low shrinkage;
3. Favorable tension;
4. No deformation;
5. High temperature resistance.
RTV-2 liquid Shoe soles mold Silicone Usages:
RTV-2 liquid Shoe soles mold Silicone is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
RTV-2 liquid Shoe soles mold Silicone Using Instruction:
Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 3-5% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After dearing, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
The datasheet of HY-238 RTV-2 liquid Shoe soles mold Silicone
Model: 238
Appearance: White
Viscosity (cps): �0000
Hardness (A°): 38±2
Tensile Strength (***): �.8
Tear Strength (KN/m): �
Elongation (%):�50
Mixing Ratio(%): 2~3
Pot life (H): 0.5~2
Demould time (H): 2~8
RTV-2 liquid Shoe soles mold Silicone Storage and Precautions:
The product, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor ***erioration
Note: the product is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100: 2 and pour them onto the sole model, then brush evenly |
| Company: |
TCC Silicone Co.,Ltd.
|
| Contact: |
Ms. Bella Wong |
| Address: |
Building 7, No.1805, Oriental pearl city, Longgang District, Shenzhen, Guangdong, china |
| Postcode: |
518117 |
| Tel: |
86-755-89212380 |
| Fax: |
86-755-89948030 |
| E-mail: |
|
|
|
|
Home
